Projet

Général

Profil

Demande #1099

faire en sorte que opium reboot sans intervention manuelle

Ajouté par Loïc Dachary il y a plus de 11 ans. Mis à jour il y a presque 5 ans.

Statut:
Fermé
Priorité:
Normale
Assigné à:
Catégorie:
Task
Version cible:
Début:
12/12/2012
Echéance:
% réalisé:

100%

Temps estimé:
Difficulté:
2 Facile

Description

TODO :

  • ajouter a cette description les références de la carte mere actuelle et du processeur
  • chercher et mettre dans cette description les références d'une carte mere de remplacement et du processeur

pour qu'il ne soit pas nécessaire de faire la manipulation décrite dans #1098 en cas de coupure de courant
http://127.0.0.1:8080/dokuwiki/doku.php?id=sysadm:machines_physiques:opium


Demandes liées

Lié à Admins - Anomalie #1223: opium downRejeté20/02/2013

Actions
Lié à Admins - Anomalie #1270: Présence d'un paniclog sur opiumFermé02/05/2013

Actions

Historique

#1

Mis à jour par Loïc Dachary il y a environ 11 ans

  • Version cible changé de Backlog à Février 2013
#2

Mis à jour par Loïc Dachary il y a presque 11 ans

  • Version cible changé de Février 2013 à Mars 2013
#3

Mis à jour par Loïc Dachary il y a presque 11 ans

  • Assigné à mis à Quentin CHERGUI
#4

Mis à jour par Loïc Dachary il y a presque 11 ans

  • Version cible changé de Mars 2013 à Avril 2013
#5

Mis à jour par Loïc Dachary il y a presque 11 ans

  • Sujet changé de réparer l'alimentation de opium.april.org à faire en sorte que opium reboot sans intervention manuelle
#6

Mis à jour par Quentin CHERGUI il y a presque 11 ans

Reboot(s) planifiés Jeudi 11 Avril entre 9h et 9h30..
Edit : reboot annulés étant donnés l'absence d'un admin au local.

#7

Mis à jour par Quentin CHERGUI il y a presque 11 ans

Tentative de reboot ce matin :

Reboot soft : J'ai dû corriger le /etc/network/interfaces après le premier pour avoir du réseau, puis plus de problèmes : la machine reboot correctement et récupère le réseau tout seule.
Reboot hard : On reste coincé sur un écran noir au boot, il faut faire plusieurs tentatives pour que la machine se décide à démarrer proprement ("Asus Expressgate" puis BIOS puis GRUB). Donc on a bien toujours un problème matériel.

#8

Mis à jour par Quentin CHERGUI il y a presque 11 ans

  • Version cible changé de Avril 2013 à Juin 2013
#9

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

Alim présente "de base" 250W noname, "peak 300W".
Si on la remplace, ça serait bien de voir si on ne peut pas prendre au moins une 300W voir 350.

#10

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

Alim changée (par une Cooler Master de 550W, pris ce qu'il y avait quand je suis passé) : aucun changement sur le problème de reboot.
Le lecteur CD n'a pas été rebranché (pénible vu son emplacement sur la tour, utilité faible (voir nulle ?) (scotché)
memtest : aucun problème détecté après une passe complète.
Débranchement des disques : rien changé, plusieurs tentatives de reboot pour pouvoir démarrer la machine
Débranchement de la carté réseau (en plus des disques, au final boot avec uniquement nouvelle alim/carte mère/proco/ram/clé USB memtest) : aucun changement, 2 ou 3 reboots avant que ça marche.

J'en déduis que c'est probablement la carte mère qui est HS.

#11

Mis à jour par Loïc Dachary il y a plus de 10 ans

  • % réalisé changé de 0 à 60
#12

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

Carte mère actuelle : ASUS Vintage 3 M3A3200 (en fait le barebone)
Processeur actuel : AMD Phenom II X4 945

À voir si l'on trouve une carte mère compatible (avec socket AM3) ou si on change carrément la base de la machine (carte mère/processeur/RAM).

#13

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

<kankan_01> Je ne trouve pas de carte mère avec socket AM3/AM3+ avec circuit graphique intégré pour Opium...
<kankan_01> Et dans tous les cas, on a actuellement de la mémoire DDR2, et toutes les cartes récentes ne supportent plus que de la DDR3 (logique... Heureusement, le Phenom II X4 945 d'Opium supporte la DDR2 et la DDR3 en fonction du chipset)
<kankan_01> Donc soit on change proco/carte mère/mémoire, soit on change carte mère et mémoire et on ajoute une mini carte graphique.
<kankan_01> (après, vu ce que dit Munin, on peut tout à fait tout changer et mettre un proco moins puissant : il est largement sous-utilisé)

#14

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

Pour avoir un contrôleur graphique, il reste la série de cartes mères Asus M5A78L-M (micro-ATX avec socket AM3, chipset AMD 760G et Radeon 3000) :
http://www.materiel.net/carte-mere-socket-am3/asus-m5a78l-m-lx-v2-72547.html (http://www.asus.com/Motherboards/M5A78LM_LX_V2/#specifications)
http://www.materiel.net/carte-mere-socket-am3/asus-m5a78l-m-usb3-78204.html (http://www.materiel.net/carte-mere-socket-am3/asus-m5a78l-m-usb3-78204.html)
Introuvable sur LDLC...

Pour rappel, la carte mère actuelle a un chipset AMD 780G et une Radeon 3200.

#15

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

Pour la commande de matériel, choix arrêté sur http://www.materiel.net/carte-mere-socket-am3/asus-m5a78l-m-lx-v2-72547.html pour la carte mère et http://www.materiel.net/barrette-memoire-pour-pc/g-skill-value-ddr3-4-go-pc10600-nt-63826.html pour la RAM (soit 80€ de budget au total).

Montage prévu la semaine prochaine, quand Nicolas sera au local.

#16

Mis à jour par Nicolas Vinot il y a plus de 10 ans

  • Version cible changé de Juin 2013 à Juillet 2013
#17

Mis à jour par Nicolas Vinot il y a plus de 10 ans

  • Statut changé de Nouveau à En cours de traitement
#18

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

Nouvel arrêt d'Opium cette nuit.
Redémarrage aussi difficile que d'habitude.

Visiblement, le disque sdc en a profité pour complètement mourrir :

smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12 family
Device Model:     ST31000528AS
Serial Number:    5VP4GSKE
Firmware Version: CC38
User Capacity:    1 000 204 886 016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Wed Aug 14 11:53:19 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:          ( 609) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 185) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   099   006    Pre-fail  Always       -       94119349
  3 Spin_Up_Time            0x0003   096   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       330
  5 Reallocated_Sector_Ct   0x0033   008   008   036    Pre-fail  Always   FAILING_NOW 3770
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail  Always       -       711308360
  9 Power_On_Hours          0x0032   068   068   000    Old_age   Always       -       28542
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       165
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   070   070   000    Old_age   Always       -       30
188 Command_Timeout         0x0032   099   099   000    Old_age   Always       -       55835426830
189 High_Fly_Writes         0x003a   099   099   000    Old_age   Always       -       1
190 Airflow_Temperature_Cel 0x0022   049   036   045    Old_age   Always   In_the_past 51 (36 156 51 51)
194 Temperature_Celsius     0x0022   051   064   000    Old_age   Always       -       51 (0 16 0 0)
195 Hardware_ECC_Recovered  0x001a   035   013   000    Old_age   Always       -       94119349
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       4
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       4
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       232679853289631
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2522232686
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1017756513

SMART Error Log Version: 1
ATA Error Count: 30 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 30 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 59 1b 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 35 59 1b 40 00  19d+06:00:53.080  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00  19d+06:00:53.080  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  19d+06:00:53.079  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  19d+06:00:53.079  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00  19d+06:00:53.060  READ NATIVE MAX ADDRESS EXT

Error 29 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 59 1b 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 35 59 1b 40 00  19d+06:00:49.900  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00  19d+06:00:49.900  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  19d+06:00:49.899  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  19d+06:00:49.899  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00  19d+06:00:49.872  READ NATIVE MAX ADDRESS EXT

Error 28 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 59 1b 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 35 59 1b 40 00  19d+06:00:46.695  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00  19d+06:00:46.694  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  19d+06:00:46.693  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  19d+06:00:46.693  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00  19d+06:00:46.674  READ NATIVE MAX ADDRESS EXT

Error 27 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 59 1b 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 35 59 1b 40 00  19d+06:00:43.497  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00  19d+06:00:43.497  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  19d+06:00:43.496  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  19d+06:00:43.496  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00  19d+06:00:43.477  READ NATIVE MAX ADDRESS EXT

Error 26 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 39 59 1b 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 35 59 1b 40 00  19d+06:00:40.335  READ FPDMA QUEUED
  60 00 10 3d 59 1b 40 00  19d+06:00:40.334  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00  19d+06:00:40.334  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  19d+06:00:40.333  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  19d+06:00:40.333  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

#19

Mis à jour par Nicolas Vinot il y a plus de 10 ans

  • % réalisé changé de 60 à 90

La carte-mère a été changée.
Le reboot semble se faire sans soucis maintenant (test effectué après quelques minutes éteint).

Le BIOS a été configuré pour redémarrer la machine en cas de coupure de courant + un boot à 6h chaque jour si la machine est éteinte.

On surveille la machine quelques temps et on pourra clôre la tache.

#20

Mis à jour par Quentin CHERGUI il y a plus de 10 ans

  • Statut changé de En cours de traitement à Résolu

Ça semble stable depuis le changement.

#21

Mis à jour par Vincent-Xavier JUMEL il y a plus de 9 ans

  • % réalisé changé de 90 à 100
#22

Mis à jour par Quentin Gibeaux il y a presque 5 ans

  • Statut changé de Résolu à Fermé

Formats disponibles : Atom PDF